IDEAL Networks NaviTEK NT User Manual
Also see for NaviTEK NT: Quick reference guide
                              | |
Contents
| 
NaviTEK NT 153800 Iss 1User Guide Page 15Tests menu description – Cable modeWhen the TESTS icon from the cable mode home screen is selected, Fig 12, the available testswill be displayed, Fig 13.Fig 12 Fig 13After any one of the three available tests from the menu is selected, the soft keys RUN andSETUP will appear:WiremapWhen the soft key RUN (F1) is pressed a wiremap test will be run on the cable currentlyconnected to the tester’s RJ45 port. The settings used for the test will be those that havebeen preset via the setup menu: SETUP>TESTS>WIRETEST>WIREMAP.After the test has been run, the display will show a graphical interpretation of the result (Fig14) and an indication of the distance to the fault or, the length of the cable. Select F2 (FAULT)and the display will show a textual list of the faults detected Fig 15.Fig 14 Fig 15 |
Related manuals for IDEAL Networks NaviTEK NT
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine