IDEC MICRO/I HG9Z-1D4PN05 Instruction Sheet

IDEC MICRO/I HG9Z-1D4PN05 Instruction Sheet Manual pdf 1 page image

B-1915(0)INSTRUCTION SHEETProtective Sheet for HG seriesConfirm that the delivered product is what you have ordered.Read this instruction sheet to make sure of correct operation.Make sure that the instruction sheet is kept by the end user.The Protective Sheet is replaceable, transparent sheet to protecta display of HG series. With the protective sheet covered on thedisplay, you can operate touch switches.1 TypeＨＧ９Ｚ－□□ : Applicable HG series code1D4PN05 : HG1G (4 3 inch) type2D5PN05 : HG2G (5.7 inch) type3D8PN02 : HG3G-8 (8.4 inch) type3DA2PN02 : HG3G-A (10.4 inch) type4DCPN02 : HG4G (12.1 inch) type2 Package ContentMake sure that the specifications of the product conform to yourrequirements, and that no parts are missing or damaged due toaccidents during transportation.Type Product Name Qt.HG9Z-1D4PN05 Protective SheetHG1G(4 3 inch) type 5HG9Z-2D5PN05 Protective SheetHG2G(5.7 inch) type 5HG9Z-3D8PN02 Protective SheetHG3G-8 (8.4 inch) type 2HG9Z-3DA2PN02 Protective SheetHG3G-A (10.4 inch) type 2HG9Z-4DCPN02 Protective SheetHG4G(12.1 inch) type 2Attachment: Instruction sheet (this sheet)3 SpecificationsType Dimension Material ThicknessHG9Z-1D4PN05 121 6 × 95.6 PET 0.188HG9Z-2D5PN05 152.0 × 125.7 PET 0.188HG9Z-3D8PN02 208.0 × 165.0 PET 0.188HG9Z-3DA2PN02 245.0 × 199.0 PET 0.188HG9Z-4PCPN02 289.0 × 227.0 PET 0.188Unit (mm)4 Instruction1. Wipe any dirt off the display using a soft cloth slightlydampened with neutral detergent or alcoholic solvent.2. Remove the back sheet of the protective sheet.3. The tab of the protective sheet should be positioned at lowerleft. Align the right side of the protective sheet with that of thedisplay, then apply the protective sheet onto the display. Careshould be taken to avoid ingress of air.4. On the top of protective sheet, a thin cover sheet is applied toprevent the protective sheet from being damaged duringtransportation. Remove it before using the display of HGseries.5 Notes for OperationWhen a protective sheet gets dirty or damaged ,replace theprotective sheet with a new one. When replacing the sheet,remove the used adhesives completely.The Protective Sheet has no protection effect against chemicals.This product has used a special material to filter out UV rays,however no warranty is given as to be installed in direct sunlightof outside.Manufacturer: IDEC CORP.2-6-64 Nishimiyahara Yodogawa-ku, Osaka 532-0004, JapanEU Authorized Representative: IDEC Elektrotechnik GmbHHeselstuecken 8, 22453 Hamburg, Germany2016. 6

/ 2

Related manuals for IDEC MICRO/I HG9Z-1D4PN05