NJR-T01SDI User Guide177 System configuration exampleThis chapter cites two system configuration examples.7.1 Used as Network ExtenderUsing the NJR-T01SDI and other IP-NINJAR encoders/decoders with a 10 GbE switch enables extending,distributing, matrix switching, videowall, and multiview.① Video and audio signals are input to the SDI input connector of the NJR-T01SDI from an industrial videodevice.② NJR-T01SDI sends these signals to the 10 GbE switch over a fiber optic cable.③ 10 GbE switch sends video and audio signals to the/several NJR-R01UHD / NJR-R04HD according to thesetting of NJR-CTB (control box for IP-NINJAR).④ NJR-R01UHD / NJR-R04HD outputs received video and audio signals from the HDMI output connector tothe monitor.⑤ Digital or analog audio of NJR-T01SDI can be selected and output from the analog audio output connectorof NJR-R01UHD.NJR-T04HD(Encoder)HDMI / DVIUp to 98 ft. (30 m)Blu-ray player1080p Blu-ray player1080p Blu-ray player1080p Blu-ray player1080pMultimode fiber (OM3) : Up to 984 ft. (300 m)Singlemode fiber (OS1) : Up to 6.21 mi. (10 km)Singlemode fiber (OS1) : Up to 24.85mi. (40 km, optional)Cat6A cable : Up to 328 ft. (100 m)4K monitorHDMI / DVIUp to 16 ft. (5 m)IP networkPC for control*3NJR-T01SDI(Encoder)Control box(NJR-CTB)NJR-R01UHD(Decoder)LAN *1Local monitorHDMI / DVIUp to 16 ft. (5 m)Microphone Mixer Analog audioSpeakersPower amp.Analog audio10 GbE switch1080p4K@60SpeakersPower amp.Analog audioLAN *1LAN *2 LAN *2*1 Connect the control box to IP-NINJAR products or 10GbE switch.*2 Connect the PC for control to IP-NINJAR to IP-NINJAR products or 10GbE switch.*3 IP-NINJAR products are controlled from the PC for control.NJR-R04HD(Decoder)1080p ×4Monitor ×4HDMI / DVIUp to 164 ft. (50 m)SD-SDI : Up to 1312 ft. (400 m)/HD-SDI : Up to 787 ft. (240 m)/3G-SDI : Up to 459 ft. (140 m)over 1694A (BELDEN RG-6) cableIndustrial video device1080pLocal monitor1080p①①①①①②② ③③⑤④④④④④[Fig. 7.1] Used as network extender