IDK NJR-T01 SDI User Manual
Also see for NJR-T01 SDI: Command reference guide
                                            | |
Contents
| 
NJR-T01SDI User Guide3410.1 Output setting10.1.1 Setting output modeYou can set the color space to be sent to the sink device.The sink device selects the best color space for the color space of the input video automatically, but if forsome reason the sink device cannot select the color space, set the desired color space in the NJR-T01SDI.Output mode can individually be set to the output from the HDMI OUTPUT connector (local output) and outputconnector for extension.Setting valueAUTO [Default]DVI outputRGB outputYCbCr 4:2:2 outputYCbCr 4:4:4 outputCommunication command@SDM Setting output mode@GDM Getting output mode10.1.2 Setting output deep colorYou can set the output deep color.Setting value24-BIT COLOR [Default]30-BIT COLOR36-BIT COLORNote:If you select “30-BIT COLOR” or “36-BIT COLOR”, the transmission clock speed increases. Noise may occurif a bad-quality cable or long cable is connected. In these cases, the noise may be removed by selecting“24-BIT COLOR”.Communication command@SDI Setting output deep color@GDI Getting output deep color |
Related manuals for IDK NJR-T01 SDI
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine