IDK NJR-T01UHD Command Reference Manual

Also see for NJR-R01UHD: User guide Command reference guide

IDK NJR-T01UHD Command Reference Manual Manual pdf 34 page image

NJR-T01UHD / NJR-R01UHD Command Guide344.5.2.5 RS-232C setting@GCTB /@SCTBRS-232C communication settingFunction Getting SettingFormat @GCTB, device, ch, reserved @SCTB, device, ch, reserved, baudrate,databit, stopbit, parityReturn value @GCTB, device, ch, reserved, baudrate,databit, stopbit, parity@SCTB, device, ch, reserved, baudrate,databit, stopbit, parityParameter device: Model1 = NJR-T01UHD, 2 = NJR-R01UHDch: Channel1 to 512 = Input channel1 to Input channel512reserved: Reservation“1” fixedbaudrate: Baud rate0 = 4800 bps, 1 = 9600 bps [Default], 2 = 19200 bps, 3 = 38400 bps,4 = 57600 bps, 5 = 115200 bpsdatabit: Data bit length7 = 7 bit, 8 = 8 bit [Default]stopbit: Stop bit1 = 1 bit [Default], 2 = 2 bitparity: Parity check0 = NONE [Default], 1 = ODD, 2 = EVENExample @GCTB,1,1,1@GCTB,1,1,1,4,8,1,0Getting the RS-232C communication settingof NJR-T01UHD Channel1.・Baud rate: 57600 bps・Data bit length: 8 bit・Stop bit: 1 bit・Parity check: NONE@SCTB,1,1,1,4,8,1,0@SCTB,1,1,1,4,8,1,0Setting the RS-232C communication settingof NJR-T01UHD Channel1 as follows:・Baud rate: 57600 bps・Data bit length: 8 bit・Stop bit: 1 bit・Parity check: NONECompleted normally.Remarks This command can be input only via the NJR-CTB command server.Values for the control mode are fixed and cannot be changed.