IDK NJR-T01UHD Command Reference Manual

Also see for NJR-R01UHD: User guide Command reference guide

IDK NJR-T01UHD Command Reference Manual Manual pdf 35 page image

NJR-T01UHD / NJR-R01UHD Command Guide354.5.2.6 LAN setting@GIP / @SIP LAN settingFunction Getting SettingFormat @GIP, device, ch, reserved @SIP, device, ch, reserved, mode, ip,mask, gatewayReturn value @GIP, device, ch, reserved, mode, ip,mask, gateway@SIP, device, ch, reserved, mode, ip,mask, gatewayParameter device: Model1 = NJR-T01UHD, 2 = NJR-R01UHDch: Channel1 to 512 = Input channel1 to Input channel512reserved: Reservation“1” fixedmode: Mode0 = DHCP [Default], 1 = staticAfter “DHCP” is set, parameters will be invalid.ip: IP address0 to 255 = 8 bits (decimal) x 4 pairs[Default] Automaticmask: Subnet mask0 to 255 = 8 bits (decimal) x 4 pairs[Default] Automaticgateway: Default gateway0 to 255 = 8 bits (decimal) x 4 pairs[Default] AutomaticExample @GIP,1,1,1@GIP,1,1,1,1,192.168.3.2,255.255.255.0,192.168.3.254Getting the LAN setting of NJR-T01UHDChannel1.・Mode: Static・IP address: 192.168.3.2・Subnet mask: 255.255.255.0・Default gateway: 192.168.3.254@SIP,1,1,1,1,192.168.3.2,255.255.255.0,192.168.3.254@SIP,1,1,1,1,192.168.3.2,255.255.255.0,192.168.3.254Setting the LAN of NJR-T01UHDChannel1 as follows:・Mode: Static・IP address: 192.168.3.2・Subnet mask: 255.255.255.0・Default gateway: 192.168.3.254Completed normally.Remarks This command can be input only via the NJR-CTB command server.If the LAN setting is changed, the communication may be disabled. Change theenvironmental settings based on the NJR settings.