IDK OPF-TH1000D User Manual
Also see for OPF-RH1000D: User guide
                                                   | |
Contents
| 
OPF-TH1000D/OPF-RH1000D User’s Guide236.4.1 Setting transmitterSetting transmitterIf devices other than devices on the figure above, settings of those devices will not be affected.1 Connect devices using cables.2 Turn on the transmitter.3 Change the RS-232C communication mode setting from communication mode to settingmode.• Set [F99] to “on” or “ALL” from the setup menu so that maintenance menu will be enabled.• Set [C90] to “01” from the maintenance menu.4 Set the transmitter using commands.【See 8 Command】5 Put the RS-232C communication mode back to communication mode.• Set [C90] to “00” from the maintenance menu.• Set [F99] to “oFF” from the setup menu.LaptopSet “C90” to “01” (9600 bps)Setting how maintenancemenu is displayedorRS-232CFG DC 5V 3ALAUDIO OUTPUTRPOWERSTATUS HDCPHDMI INPUTTxOPTICAL DAISYCHAIN Tx for HDMI OPF-TH1000DRXOPTICALTXCLASS 1 LASER PRODUCTクラス 1 レーザ製品KEY LOCK－＋SETSIGNAL |
Related manuals for IDK OPF-RH1000D
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine