Instruction ManualInnovative DisplayWorksRCM-26Accessing Compressor Compartment:Changing Electric Impulse Cooler Graphics:7BEVERAGE STORAGE1 Do not overload the cooler beyond the red limitation line.2 Leave adequate space between beverage cans to allow air circulation.3 This cooler is primarily for storing beverage cans and plastic bottles. Avoid putting glass containers in the cooler.4 All beverage products should be properly sealed to avoid leaking into the cooler.MAINTENANCEAccessing Inner Fan:1 Remove the basket from the inside of the cooler.2. Using a Philips screwdriver, unscrew (4) screws at the cover of inner fan.3 Remove the inner fan cover.4 Service or change inner fan.5 Reverse steps 1-4 after maintenance.2 Remove the grill3 Replace or service the parts in the compressorcompartment.4 Reverse steps 1-3 after maintenance.1 Using a Philips screwdriver, unscrew (2) screws at the bottom of grill.2 Wedge the graphic under the plastic frame of the cooler (sidesand bottom) and the magnetic strip.3 Adjust the graphic to the correctposition.1 Place graphic against the face of the cooler, open the top magnetic strip.