AFOLUX LX Panel PCPage 51IDE device configurations are changed or set in the IDE Configuration menu. If an IDEdevice is detected, and one of the above listed two BIOS configuration options is selected,the IDE configuration options shown in Section 5.2.1 appear.Î Base Memory:The Base Memory is NOT user configurable. The POST determines the amount of base(or conventional) memory installed in the system. The value of the base memory istypically 512K for systems with 512K memory installed, or 640K for systems with 640K ormore memory installed.Î Extended MemoryThe Extended Memory is NOT user configurable. The BIOS determines how muchextended memory is present during the POST. This is the amount of memory above 1MBlocated in the memory address map of the CPU.Î Total MemoryThe Total Memory is NOT user configurable.5.2.1 IDE Primary Master/SlaveUse the IDE Primary Master/Slave menu to set or change the master/slave IDEconfigurations.Î IDE HDD Auto-Detection [Press Enter]Use the IDE HDD Auto-Detection option to enable BIOS to automatically detect the IDEsettings. Select IDE HDD Auto-Detection and press ENTER. BIOS automatically detectsthe HDD type. Do not set this option manually.Î IDE Primary Master [Auto]Use the IDE Primary Master option to activate or deactivate the following drive channels: Channel 0 Master Channel 0 Slave Channel 1 Master
