Page 294.1 Anti-static PrecautionsWARNING:Failure to take ESD precautions during the maintenance of theAFL-9652 may result in permanent damage to the AFL-9652 andsevere injury to the user.Electrostatic discharge (ESD) can cause serious damage to electronic components,including the AFL-9652. Dry climates are especially susceptible to ESD. It is thereforecritical that whenever the AFL-9652 is accessed internally, or any other electricalcomponent is handled, the following anti-static precautions are strictly adhered to. Wear an anti-static wristband: - Wearing a simple anti-static wristband canhelp to prevent ESD from damaging the board. Self-grounding:- Before handling the board touch any grounded conductingmaterial. During the time the board is handled, frequently touch anyconducting materials that are connected to the ground. Use an anti-static pad: - When configuring the AFL-9652, place it on anantic-static pad. This reduces the possibility of ESD damaging the AFL-9652. Only handle the edges of the PCB: - When handling the PCB, hold the PCBby the edges.4.2 Installation PrecautionsWhen installing the flat panel PC, please follow the precautions listed below: Power turned off: When installing the flat panel PC, make sure the power isoff. Failing to turn off the power may cause severe injury to the body and/ordamage to the system. Certified Engineers: Only certified engineers should install and modifyonboard functionalities. Mounting: The flat panel PC is a heavy device. When mounting the systemonto a rack, panel, wall or arm please make sure that at least two people are
