IEI Technology AFL-9652 Series User Manual

Contents

Page 53Step 3: Locate the DDR2 memory module on the motherboard of the flat panel PC(Figure 5-2).Figure 5-2: SO-DIMM Socket LocationsStep 4: Remove the DDR2 memory module by pulling both the spring retainer clipsoutward from the socket.Step 5: Grasp the DDR2 memory module by the edges and carefully pull it out of thesocket.Step 6: Install the new DDR2 memory module by pushing it into the socket at an angle(Figure 5-3).Step 7: Gently pull the spring retainer clips of the SO-DIMM socket out and push therear of the DDR2 memory module down (Figure 5-3).Step 8: Release the spring retainer clips on the SO-DIMM socket. They clip into placeand secure the DDR2 memory module in the socket.Step 0: