IEI Technology AFL-HM55 Series User Manual

Also see for AFL-HM55: User manual

Contents

AFL-HM55 Series Panel PCPage 28Short 2 - 3 Clear CMOS SetupTable 3-3: Clear CMOS Jumper SettingsThe location of the clear CMOS jumper is shown in Figure 3-6 below.Figure 3-6: Clear CMOS Jumper3.9.4 COM1 Pin 9 SettingJumper Label: JP7 and JP8Jumper Type: 6-pin headerJumper Settings: See Table 3-4 and Table 3-5Jumper Location: See Figure 3-7 and Figure 3-8Two jumpers (JP7 and JP8) configure pin 9 on COM1 and COM3 DB-9 connectors. Pin 9on the COM1 and the COM3 DB-9 connectors can be set as the ring (RI) signal, +5 V or+12 V. The COM1 and COM3 Pin 9 Setting jumper selection options are shown in thetables below.