AFL-HM55 Series Panel PCPage 655.3.4 SATA ConfigurationUse the SATA Configuration menu (BIOS Menu 6) to change and/or set theconfiguration of the SATA devices installed in the system.Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.AdvancedSATA ConfigurationSATA Port0 Not PresentSATA Port1 Not PresentSATA Port2 Not PresentSATA Mode [IDE Mode]Serial-ATA Controller 0 [Compatible]Serial-ATA Controller 1 [Enhanced](1) IDE Mode. (2) AHCIMode.---------------------: Select Screen : Select ItemEnter Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save & ExitESC: ExitVersion 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.BIOS Menu 6: IDE Configuration SATA Mode [IDE Mode]Use the SATA Mode option to configure SATA devices as normal IDE devices. Disable Disables SATA devices. IDE Mode D EFAULT Configures SATA devices as normal IDE device. AHCI Mode Configures SATA devices as AHCI device. Serial-ATA Controller n [Compatible]Use the Serial-ATA Controller option to configure the SATA controller. Disabled Disables the on-board SATA controller. Enhanced Configures the on-board SATA controller to be inEnhanced mode. In this mode, IDE channels and SATAchannels are separated.
