AFL2-12A-D525 Series Panel PCPage 111WARNING:The precautions outlined in this chapter should be strictly followed.Failure to follow these precautions may result in permanent damage tothe AFL2-12A-D525.A.1 Safety PrecautionsPlease follow the safety precautions outlined in the sections that follow:A.1.1 General Safety PrecautionsPlease ensure the following safety precautions are adhered to at all times. Follow the electrostatic precautions outlined below whenever theAFL2-12A-D525 is opened. Make sure the power is turned off and the power cord is disconnectedwhenever the AFL2-12A-D525 is being installed, moved or modified. Do not apply voltage levels that exceed the specified voltage range.Doing so may cause fire and/or an electrical shock. Electric shocks can occur if the AFL2-12A-D525 chassis is opened whenthe AFL2-12A-D525 is running. Do not drop or insert any objects into the ventilation openings of theAFL2-12A-D525. If considerable amounts of dust, water, or fluids enter theAFL2-12A-D525, turn off the power supply immediately, unplug the powercord, and contact the AFL2-12A-D525 vendor. DO NOT:o Drop the AFL2-12A-D525 against a hard surface.o Strike or exert excessive force onto the LCD panel.o Touch any of the LCD panels with a sharp objecto In a site where the ambient temperature exceeds the rated temperature
