AFL3-W15C/W19C-ULT3 Panel PCPage 116 If considerable amounts of dust, water, or fluids enter the device, turn offthe power supply immediately, unplug the power cord, and contact theAFL3-W15C/W19C-ULT3 vendor. DO NOT:o Drop the device against a hard surface.o Strike or exert excessive force onto the LCD panel.o Touch any of the LCD panels with a sharp objecto In a site where the ambient temperature exceeds the rated temperatureB.1.2 Anti-static PrecautionsWARNING:Failure to take ESD precautions during the installation of theAFL3-W15C/W19C-ULT3 may result in permanent damage to theAFL3-W15C/W19C-ULT3 and severe injury to the user.Electrostatic discharge (ESD) can cause serious damage to electronic components,including the AFL3-W15C/W19C-ULT3. Dry climates are especially susceptible to ESD. Itis therefore critical that whenever the AFL3-W15C/W19C-ULT3 is opened and any of theelectrical components are handled, the following anti-static precautions are strictlyadhered to. Wear an anti-static wristband: Wearing a simple anti-static wristband canhelp to prevent ESD from damaging any electrical component. Self-grounding: Before handling any electrical component, touch anygrounded conducting material. During the time the electrical component ishandled, frequently touch any conducting materials that are connected to theground. Use an anti-static pad: When configuring or working with an electricalcomponent, place it on an anti-static pad. This reduces the possibility of ESDdamage. Only handle the edges of the electrical component: When handling theelectrical component, hold the electrical component by its edges.