AFL3-W15C/W19C-ULT3 Panel PCPage 183.1 Anti-static PrecautionsWARNING:Failure to take ESD precautions during the maintenance of theAFL3-W15C/W19C-ULT3 may result in permanent damage to theAFL3-W15C/W19C-ULT3 and severe injury to the user.Electrostatic discharge (ESD) can cause serious damage to electronic components,including the AFL3-W15C/W19C-ULT3. Dry climates are especially susceptible to ESD. Itis therefore critical that whenever the AFL3-W15C/W19C-ULT3 is accessed internally, orany other electrical component is handled, the following anti-static precautions are strictlyadhered to. Wear an anti-static wristband: Wearing a simple anti-static wristband canhelp to prevent ESD from damaging the board. Self-grounding: Before handling the board, touch any grounded conductingmaterial. During the time the board is handled, frequently touch anyconducting materials that are connected to the ground. Use an anti-static pad: When configuring the AFL3-W15C/W19C-ULT3,place it on an anti-static pad. This reduces the possibility of ESD damagingthe AFL3-W15C/W19C-ULT3. Only handle the edges of the PCB: When handling the PCB, hold the PCBby the edges.3.2 Installation PrecautionsWhen installing the flat bezel panel PC, please follow the precautions listed below: Power turned off: When installing the flat bezel panel PC, make sure thepower is off. Failing to turn off the power may cause severe injury to the bodyand/or damage to the system. Certified Engineers: Only certified engineers should install and modifyonboard functionalities.
