DRPC-100 Embedded SystemPage 136B.1 Safety PrecautionsWARNING:The precautions outlined in this appendix should be strictly followed.Failure to follow these precautions may result in permanent damage tothe DRPC-100.Please follow the safety precautions outlined in the sections that follow:B.1.1 General Safety PrecautionsPlease ensure the following safety precautions are adhered to at all times. Make sure the power is turned off and the power cord is disconnectedwhen moving, installing or modifying the system. Do not apply voltage levels that exceed the specified voltage range.Doing so may cause fire and/or an electrical shock. Electric shocks can occur if opened while still powered on. Do not drop or insert any objects into the ventilation openings. If considerable amounts of dust, water, or fluids enter the system, turnoff the power supply immediately, unplug the power cord, and contact thesystem vendor. DO NOT:o Drop the system against a hard surface.o Strike or exert excessive force onto the LCD panel.o Touch any of the LCD panels with a sharp objecto In a site where the ambient temperature exceeds the rated temperature
