IVS-200-ULT2 Embedded SystemPage 394.1 IntroductionThe BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes tocertain system settings. This chapter outlines the options that can be changed.NOTE:Some of the BIOS options may vary throughout the life cycle of theproduct and are subject to change without prior notice.4.1.1 Starting SetupThe UEFI BIOS is activated when the computer is turned on. The setup program can beactivated in one of two ways.1. Press the D ELETE key as soon as the system is turned on or2. Press the D ELETE key when the “Press Delete to enter SETUP” messageappears on the screen. 0.If the message disappears before the D ELETE key is pressed, restart the computer and tryagain.4.1.2 Using SetupUse the arrow keys to highlight items, press ENTER to select, use the PageUp andPageDown keys to change entries, press F1 for help and press ESC to quit. Navigationkeys are shown in.Key FunctionUp arrow Move to the item aboveDown arrow Move to the item belowLeft arrow Move to the item on the left hand sideRight arrow Move to the item on the right hand side+ Increase the numeric value or make changes
