IVS-300 Embedded SystemPage 64 Enabled D EFAULT The onboard High Definition Audio controllerautomatically detected and enabled XHCI Mode [Smart Auto]Use the XHCI Mode BIOS option to configure the USB xHCI (USB 3.0) controller. Enabled Enable the xHCI controller. USB 3.0 ports behave asUSB 3.0 ports. SmartAutoD EFAULT Allow the use of USB 3.0 devices prior to OS boot.USB 3.0 ports function as USB 3.0 ports even during areboot.4.5 SecurityUse the Security menu (BIOS Menu 16) to set system and user passwords.Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.Main Advanced Chipset Security Boot Save & ExitPassword DescriptionIf ONLY the Administrator’s password is set,then this only limits access to Setup and isonly asked for when entering Setup.If ONLY the User’s password is set, then thisis a power on password and must be entered toboot or enter Setup. In Setup the User willhave Administrator rights.The password length must bein the following range:Minimum length 3Maximum length 20Administrator PasswordUser PasswordSet AdministratorPassword---------------------: Select Screen : Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save & ExitESC: ExitVersion 2.17.1245. Copyright (C) 2016 American Megatrends, Inc.BIOS Menu 16: Security Administrator PasswordUse the Administrator Password to set or change an administrator password.
