IEI Technology KINO-QM770 User Manual

Also see for KINO-QM770: Quick installation guide Quick installation guide

Contents

KINO-QM770 Mini-ITX SBCPage 142After completing the five initial setup procedures as described above, users can accessthe recovery tool by pressing <F3> while booting up the system. The detailed informationof each function is described in Section B.5.NOTE:The initial setup procedures for Linux system are described inSection B.3.B.1.1 System RequirementNOTE:The recovery CD can only be used with IEI products. The software willfail to run and a warning message will appear when used on non-IEIhardware.To create the system backup, the main storage device must be split into two partitions(three partitions for Linux). The first partition will be for the operating system, while thesecond partition will be invisible to the operating system and contain the backup made bythe one key recovery software.The partition created for recovery images must be big enough to contain both the factorydefault image and the user backup image. The size must be calculated before creating the