NANO-945GSE2Page 79storage devices. Some legacy OS do not support thismode.Î Legacy IDE Channels [PATA Pri, SATA Sec]Î SATA Only Only the SATA drives are enabled.Î SATA Pri, PATA Sec D EFAULT The IDE drives are enabled on the PrimaryIDE channel. The SATA drives are enabled onthe Secondary IDE channel.Î PATA Only The IDE drives are enabled on the primaryand secondary IDE channels. SATA drivesare disabled.Î IDE Master and IDE SlaveWhen entering setup, BIOS automatically detects the presence of IDE devices. BIOSdisplays the status of the auto detected IDE devices. The following IDE devices aredetected and are shown in the IDE Configuration menu: Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE SlaveThe IDE Configuration menu (876H778HBIOS Menu 4) allows changes to the configurations for theIDE devices installed in the system. If an IDE device is detected and one of the four BIOSconfiguration options listed above is selected, the IDE configuration options shown inSection 7 7 9 H 5.3.2.1 will appear.5.3.2.1 IDE Master, IDE SlaveUse the IDE Master and IDE Slave configuration menu to view both primary andsecondary IDE device details and configure the IDE devices connected to the system.
