IEI Technology NANO-PV-D4252 User Manual

Also see for NANO-PV-D4252: Quick installation guide User manual

Contents

NANO-PV-D4252/N4552/D5252 EPIC SBCPage 45Before the NANO-PV-D4252/N4552/D5252 is installed in the system, the jumpers must beset in accordance with the desired configuration. The jumpers on theNANO-PV-D4252/N4552/D5252 are listed in 6 Table 4-1.Description Type LabelAT Auto Button 2-pin header J_AUTOPWR1Clear CMOS 3-pin header J_CMOS1CompactFlash® Master/Slave function setting 2-pin header JCF1CompactFlash® voltage select 2-pin header J_VCF1COM3 RS-232/422/485 select 6-pin header J4COM3 RS-422/485 select 6-pin header J6COM3 RS-422 Termination select 2-pin header J10COM3 RS-485 Termination select 2-pin header J9LVDS1 LCD Voltage select 6-pin header J_VLVDS1LVDS2 LCD Voltage select 6-pin header J_VLVDS2LVDS1 LCD panel type 8-pin header J_LCD_TYPE1LVDS2 LCD panel type 6-pin header JP2Table 4-1: Jumpers4.5.1 AT Auto Button Power Select Jumper SettingsJumper Label: J_AUTOPWR1Jumper Type: 2-pin headerJumper Settings: See Table 4-2Jumper Location: See Figure 4-2The AT Auto Button Power Select jumper specifies the systems auto button power modeas AT or ATX.Setting DescriptionShort Use AT power