NANO-PV-D4252/N4552/D5252 EPIC SBCPage 775.3.4 SATA ConfigurationUse the SATA Configuration menu (BIOS Menu 6) to change and/or set theconfiguration of the SATA devices installed in the system.Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.AdvancedPATA Master Not PresentPATA Slave Not PresentSATA Port0 Not PresentSATA Port1 Not PresentSATA Port2 Not PresentSATA Port3 Not PresentATA/IDE Configuration [Enhanced]Configure SATA as [IDE]Select ATA/IDEConfiguration.---------------------: Select Screen : Select ItemEnter SelectF1 General HelpF2 Previous ValuesF3 OptimizedDefaultsF4 SaveESC ExitVersion 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.BIOS Menu 6: IDE Configuration ATA/IDE Configurations [Enhanced]Use the ATA/IDE Configurations option to configure the ATA/IDE controller. Disabled Disables the on-board ATA/IDE controller. Compatible Configures the on-board ATA/IDE controller to be incompatible mode. In this mode, a SATA channel willreplace one of the IDE channels. This mode supportsup to 4 storage devices. Enhanced D EFAULT Configures the on-board ATA/IDE controller to be inEnhanced mode. In this mode, IDE channels and SATAchannels are separated. This mode supports up to 6storage devices. Some legacy OS do not support thismode.
