NOVA-PV-D5251/D4251 5.25" SBCPage 985.3.4 IDE ConfigurationUse the IDE Configuration menu (BIOS Menu 6) to change and/or set the configurationof the SATA devices installed in the system.Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.AdvancedPATA Master Not PresentPATA Slave Not PresentSATA Port0 Not PresentSATA Port1 Not PresentSATA Port2 Not PresentSATA Port3 Not PresentATA/IDE Configuration [Enhanced]Configure SATA as [IDE]Select ATA/IDEConfiguration.---------------------ÅÆ: Select Screen↑ ↓: Select ItemEnter SelectF1 General HelpF2 Previous ValuesF3 OptimizedDefaultsF4 SaveESC ExitVersion 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.BIOS Menu 6: IDE ConfigurationÎ ATA/IDE Configurations [Enhanced]Use the ATA/IDE Configurations option to configure the ATA/IDE controller.Î Disabled Disables the on-board ATA/IDE controller.Î Compatible Configures the on-board ATA/IDE controller to be incompatible mode. In this mode, a SATA channel willreplace one of the IDE channels. This mode supports upto 4 storage devices.Î Enhanced D EFAULT Configures the on-board ATA/IDE controller to be inEnhanced mode. In this mode, IDE channels and SATAchannels are separated. This mode supports up to 6storage devices. Some legacy OS do not support thismode.
