IEI Technology NOVA-PV-D5251 User Manual

Contents

IEI Technology NOVA-PV-D5251 User Manual Manual pdf 84 page image

NOVA-PV-D5251/D4251 5.25" SBCPage 68Figure 4-4: AT/ATX Power Select Jumper Location4.5.2 Clear CMOSJumper Label: J_CMOS1Jumper Type: 3-pin header (1x3)Jumper Settings: See 7 Table 4-3Jumper Location: See 7 Figure 4-5If the NOVA-PV-D5251/D4251 fails to boot due to improper BIOS settings, the clearCMOS jumper clears the CMOS data and resets the system BIOS information. To do this,use the jumper cap to close pins 2 and 3 for a few seconds then reinstall the jumper clipback to pins 1 and 2.If the “CMOS Settings Wrong” message is displayed during the boot up process, the faultmay be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of thefollowing: Enter the correct CMOS setting Load Optimal Defaults Load Failsafe Defaults.After having done one of the above, save the changes and exit the CMOS Setup menu.