WAFER-BW SBCPage 805.3.4.1.6 Serial Port 6 Configuration Serial Port [Enabled]Use the Serial Port option to enable or disable the serial port. Disabled Disable the serial port Enabled D EFAULT Enable the serial port Change Settings [Auto]Use the Change Settings option to change the serial port IO port address and interruptaddress. Auto D EFAULT The serial port IO port address and interruptaddress are automatically detected. IO=2E0h; IRQ=11 Serial Port I/O port address is 2E0h and theinterrupt address is IRQ11 IO=3E8h;IRQ=10,11Serial Port I/O port address is 3E8h and theinterrupt address is IRQ10,11 IO=2E8h;IRQ=10,11Serial Port I/O port address is 2E8h and theinterrupt address is IRQ10,11 IO=2D0h;IRQ=10,11Serial Port I/O port address is 2D0h and theinterrupt address is IRQ10,11 IO=2E0h;IRQ=10,11Serial Port I/O port address is 2E0h and theinterrupt address is IRQ10,11 Serial Port Mode [RS232]Use the Serial Port Mode option to select the Serial Port 6 signaling mode. RS232 D EFAULT Serial Port 6 signaling mode is RS-232 RS422 Serial Port 6 signaling mode is RS-422 RS485 Serial Port 6 signaling mode is RS-485
