WAFER-BW SBCPage 83 Auto mode fan start temperature [50]WARNING:Setting this value too high may cause the fan to rotate at full speed onlywhen the CPU is at a very high temperature and therefore cause thesystem to be damaged.The Auto mode fan start temperature option can only be set if the CPU_FAN1 SmartFan Control option is set to Auto Mode. If the system temperature is between StartTemperature and Off Temperature, the fan speed change to be Start PWM. To set avalue, select the Auto mode fan start temperature option and enter a decimal numberbetween 1 and 100. The temperature range is specified below. Minimum Value: 1°C Maximum Value: 100°C Auto mode fan off temperature [40]WARNING:Setting this value too high may cause the fan to speed up only whenthe CPU is at a very high temperature and therefore cause the systemto be damaged.The Auto mode fan off temperature option can only be set if the CPU_FAN1 Smart Fancontrol option is set to Auto Mode. If the system temperature is lower than Auto modefan off temperature, the fan speed change to be lowest. To set a value, select the Automode fan off temperature option and enter a decimal number between 1 and 100. Thetemperature range is specified below. Minimum Value: 1°C Maximum Value: 100°C
