WAFER-LX MotherboardPage 83Î Total MemoryThe Total Memory is NOT user configurable.6.2.1 IDE Primary Master/SlaveUse the IDE Primary Master/Slave menu to set or change the master/slave IDEconfigurations.Î IDE HDD Auto-Detection [Press Enter]Use the IDE HDD Auto-Detection option to enable BIOS to automatically detect the IDEsettings. Select IDE HDD Auto-Detection and press ENTER. BIOS automatically detectsthe HDD type. Do not set this option manually.Î IDE Primary Master [Auto]Use the IDE Primary Master option to activate or deactivate the following drive channels: Channel 0 Master Channel 0 Slave Channel 1 Master Channel 0 SlaveÎ None If no drives are connected to the IDE channel select thisoption. Once set, this IDE channel becomesinaccessible and any drives attached to it areundetected.Î Auto D EFAULT Setting this option allows the device to be automaticallydetected by the BIOS.Î Manual Selecting this option allows manual configuration of thedevice on the IDE channel in BIOS.Î Access Mode [Auto]The Access Mode option can only be configured if the BIOS configuration option is set toeither Manual or Auto.. Use the Access Mode option to determine the hard disk BIOS
