10 2. Installation – Linking System2.1 Connecting Control Box to Power Supply1. PW02 2P Power Cable Connection1a. Secure the wires to the screws terminals on the power supply. Make sure to follow thecolor coding as shown below. Black Cable → COM Yellow Cable → +V1b. Connect the other end to the 12V+ jack on the control box.2. PW03 AC Power Cable Connection2a. Secure the wires to the screw terminals on the power supply. Make sure to follow thecolor coding as shown below: Black Cable → (AC) N White Cable → (AC) L Green Cable → (GND)2b. Connect the other end to the mains.
