IGS Diamond Progressive Operator's Manual
                                                               | |
Contents
| 
36 8. Bookkeeping8. BookkeepingUnder the linking mode, you can access the bookkeeping data either from the PC board or fromthe control box.8.1 Overall System Short/Long Term DataFrom 1st Slave MachineTo access the bookkeeping data:1. At the machine with slave ID1, press [RECORD] and then enter the password.2. Then press [SMALL].The default is pressing [Play] for 8 times.3. Select to view short term or long term data as required.Press[RECORD][SMALL]SYSTEMPASSWORD[BIG]SHORT TERM[DOUBLE]LONG TERM[SMALL]ADJUSTMENTDefault password:Press [PLAY] 8 times[PLAY]SET PASSWORD[TAKE]SYSTEM RESET[DOUBLE]TIME[BIG]SYSTEMFrom Control Box1. Using the CO4 cable, connect one end to the LAN port on the control box and the other endto the LAN port on the computer.2. Configure your computer to use an IP address in the same subnet as the control box’s IP.For example:IP address: 172.16.1.1Subnet mask: 255.255.0.03. Open a browser and enter http://172.16.1.2 in the URL field. |
Related manuals for IGS Diamond Progressive
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine