IKA Plate RCT digital Manual

Contents

9/// Power supply / Switching off the deviceWarning!› The device will automatically restart in mode B following any interruption to the powersupply�› The voltage stated on the type plate must correspond to the mains voltage�› The outlet for the mains plug must be easily accessible�› The device can only be disconnected from the mains outlet by pulling out the power cord setor the connector plug�/// For protection of the equipment› The device may only be opened by qualified and IKA approved experts�› Do not cover the device, even partially e�g� with metallic plates or film� This may result inoverheating�› Protect the device and accessories from bumps and impacts�› Keep the base plate clean�› Observe the minimum distances:- between devices min� 100 mm,- between device and wall min� 100 mm,- above the device min� 800 mm�mm 100 >mm 100 >mm 100 >