![IKA RV 10 basic Operating Instructions Manual Manual pdf 4 page image](https://manuals-archive2.s3.amazonaws.com/3509574/54e7048a9fd5d3891339504bd0679ba14f.jpg)
042009 19Drive RV 10 basic/digitalCAUTION! Loosen transportation lock (fig. 4a)!☞ Hold the lift with your hand on the height position and remove thethumb screw on the back of the appliance (A).☞ Once the transportation lock has been removed, the lift movesslowly to its upper end position. The distance is approx. 140 mm.☞ Connect the device to the power supply (B) using the suppliedpower cord (B).Adjustable base (Fig. 4b)☞ Attach the bracket for the Woulff bottle to the left side of the lift(fig. 5).☞ Insert the bottle and attach the supplied hose connectors to thebottle (fig. 6).☞ Remove the clamping device for the angle setting of the rotationdrive on the right side of the lift by rotating the knurled screwcounter clockwise (by lightly pressing and turning at the sametime, the knurled screw comes out farther).☞ Set the drive at an angle of approx. 30° (fig. 7).☞ Then secure the rotation drive from being accidentally turned bytightening the knurled screw in a clockwise direction.Heating bath HB 10 basic/digitalCAUTION! Refer to the chapter entitled "Commissioning" in the hea-ting bath instruction manual!☞ Place the heating bath on the stand of the rotation drive and pushit into the left position (fig. 8).Note: Data is exchanged between the drive unit and the heatingbath by means of an infrared link. Please note that reliable com-munication is only guaranteed when the infrared beam has clearline-of-sight to the detector.Glassware☞ Open the locking device on the drive head by turning it 60° coun-ter clockwise (D), (fig. 9).Setting upFig. 4aFig. 4bFig. 5Fig. 6Fig. 7CIRFig. 8Fig. 9DE