This function is not available for some ovenfunctions.Residual heatWhen you turn off the oven, the displayshows the residual heat. You can use theheat to keep the food warm.Clock functionsClock functions tableClock function ApplicationMinuteMinderTo set a countdown(max. 2 h 30 min). Thisfunction has no effect onthe operation of theoven.Press to turn on thefunction. Use the shuttleto set the minutes andto start.Duration To set how long theoven works (max. 23 h59 min).End Time To set the switch-offtime for a heating func-tion (max. 23 h 59 min).If you set the time for a clock function, thetime starts to count down after 5 seconds.If you use the clock functions:Duration, End Time, the oventurns off the heating elementsafter 90 % of the set time. Theoven uses the residual heat tocontinue the cooking processuntil the time ends (3 - 20minutes).Setting the clock functionsBefore you use the functions:Duration, End Time, you must seta heating function andtemperature first. The oven turnsoff automatically.You can use the functions:Duration and End Time at thesame time if you want toautomatically turn on and turn offthe oven on a given time later.The functions: Duration and EndTime do not work when you usethe core temperature sensor.1. Set a heating function.2. Press again and again until thedisplay shows the necessary clockfunction and the related symbol.3. Use the shuttle to set the necessary time.4. Press to confirm.When the time ends, a signal sounds. Theoven turns off. The display shows amessage.5. Press any symbol to stop the signal.Heat + HoldConditions for the function:• The set temperature is more than 80 °C.• The function: Duration is set.The function: Heat + Hold keeps preparedfood warm at 80 °C for 30 minutes. It turnson after the baking or roasting procedureends.ENGLISH 19