3= Grasp the edges of the oven door with both hands and closethe oven door until it will no longer close. Lift and pull ovendoor toward you and remove. Set the oven door aside on acovered work surface.4. Remove bottom screw on each side of the oven trim.5. Grasp the bottom end of trim and pull away from oven.6=A. Remove trim screw and pull out.Slide top end of trim downward to remove trim from oven. Settrim aside.Electrical Shock HazardDisconnect power before servicing.Use 8 gauge solid copper wire.Electrically ground oven.Failure to follow these instructions can result in death,fire, or electrical shock.This oven is manufactured with a neutral (white) power supplywire and a cabinet-connected green (or bare) ground wire twistedtogether.1. Disconnect power.2. Feed the flexible cable conduit from the oven through theopening in the cabinet.3. Remove junction box cover if it is present.4. Install a UL listed or CSA approved conduit connector to thejunction box.A. UL listed or CSA approved conduit connector5. Route the flexible cable conduit from the oven to the junctionbox through a UL listed or CSA approved conduit connector.6. Tighten screws on conduit connector.7. See "Electrical Connection Options Chart" to completeinstallation for your type of electrical connection.Electrical Connection Options ChartIf your home has: Go to section:4-wire 4-wire Cable from HomePower Supply3-wire 3-wire Cable from HomePower Supply