IKEA IBD550PRS02 Installation Instructions Manual

Also see for IBD550PRS04: Use & care guide

Contents

IKEA IBD550PRS02 Installation Instructions Manual Manual pdf 7 page image

......Excessive Weight HazardUse two or more people to move and install oven.Failure to do so can result in back or other injury.1=2=Using 2 or more people, lift oven partially into cabinet cutoutusing the oven opening as an area to grip.NOTE: Push against seal area of oven front frame whenpushing oven into cabinet. Do not push against outsideedges.\Push against seal area of front frame to push oven intocabinet until shipping feet almost contact cabinet.\A5= Securely fasten oven to cabinet using the #8-14 x 1" screws(2 for single oven, 4 for double oven) provided. Insert thescrews through holes in mounting rails. Do not overtightenscrews.BA. Mounting railB. Insert #8-14 x 1" screw.6= On some models, the oven vent is taped to the side of theoven. See the following instructions to install.• Insert the vent tabs (B) into slots (A) in the oven frame.• With one #8-18 x 3/8"screw (C) for each side of the vent,fasten vent securely to the oven.A Bi!¸ ii ¸\ \DCA. Shipping foot3. On models with shipping feet, use a Phillips screwdriver toremove screws attaching the shipping feet.4. Push oven completely into cabinet and center oven intocabinet cutout.A. Oven frame slotB. Vent tabC. #8-18 x 3/8" screwD. Oven vent