IKEA LAGAN Manual
Also see for LAGAN: ManualManualManualManualUser manual
                                                                        | |
• It is advisable to wait at least four hoursbefore connecting the appliance to allowthe oil to flow back in the compressor.• Adequate air circulation should bearound the appliance, lacking this leadsto overheating. To achieve sufficient ven-tilation follow the instructions relevant toinstallation.• Wherever possible the back of the prod-uct should be against a wall to avoidtouching or catching warm parts (com-pressor, condenser) to prevent possibleburn.• The appliance must not be located closeto radiators or cookers.• Make sure that the mains plug is accessi-ble after the installation of the appliance.Service• Any electrical work required to do theservicing of the appliance should be car-ried out by a qualified electrician or com-petent person.• This product must be serviced by the Af-ter Sales Service, and only genuine spareparts must be used. The service numbersare listed in the Service information.Environment ProtectionThis appliance does not contain gasseswhich could damage the ozone layer, in ei-ther its refrigerant circuit or insulation mate-rials. The appliance shall not be discardedtogether with the urban refuse and rubbish.The insulation foam contains flammablegases: the appliance shall be disposed ac-cording to the applicable regulations to ob-tain from your local authorities. Avoid dam-aging the cooling unit, especially at the rearnear the heat exchanger. The materialsused on this appliance marked by the sym-bol are recyclable.Product descriptionCarefully read the operating instructionsbefore using the appliance. 2 3 4851 67ENGLISH 6 |
Related manuals for IKEA LAGAN
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine