IKEA LAGAN User Manual
Also see for LAGAN: ManualManualManualManualUser manual
                        | |
Once you have checked the appliance,deactivate and activate the appliance. Ifthe problem occurs again, contact anAuthorised Service Centre.For alarm codes not described in the table,contact an Authorised Service Centre.The washing and drying results are not satisfactoryProblem Possible solutionThere are whitish streaks orbluish layers on glasses anddishes.• The release quantity of rinse aid is too much. Adjustthe rinse aid selector to a lower position.• The quantity of detergent is too much.There are stains and dry wa-ter drops on glasses anddishes.• The released quantity of rinse aid is not sufficient. Ad-just the rinse aid selector to a higher position.• The quality of the rinse aid can be the cause.The dishes are wet. • The programme does not have a drying phase or hasa drying phase with low temperature.• The rinse aid dispenser is empty.• The quality of the rinse aid can be the cause.Refer to "Hints and tips" forother possible causes.Technical informationProduct denomination Fully integrated dishwasherDimensions Width / height / depth(mm)596 / 818-898 / 555Electrical connection 1) Voltage (V) 220 - 240Frequency (Hz) 50Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)Water supply Cold water or hot water 2) max 60 °CCapacity Place settings 12Power consumption Left-on mode (W) 5.0Power consumption Off-mode (W) 0.501) Refer to the rating plate for other values.2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water sup-ply to decrease energy consumption.ENGLISH 16 |
Related manuals for IKEA LAGAN
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine