IKEA LAGAN User Manual
Also see for LAGAN: ManualManualManualManualUser manual
                        | |
SettingsProgramme selection mode and usermodeWhen the appliance is in programmeselection mode it is possible to set aprogramme and to enter the user mode.In user mode, the following settings canbe changed:• The activation or the deactivation of theacoustic signal for end of programme.These settings will be saved until youchange them again.How to set the programme selection modeThe appliance is in programme selectionmode when all the programme indicatorsare on.When you activate the appliance, usually itis in programme selection mode. However,if this does not happen, you can set theprogramme selection mode in the followingway:Press and hold the programme button untilthe appliance is in programme selectionmode.Acoustic signalsThe acoustic signals operate when theappliance has a malfunction and it is notpossible to deactivate them.There is also an acoustic signal thatoperates when the programme iscompleted. By default, this acoustic signal ison, but it is possible to deactivate it.How to deactivate the acoustic signal forthe end of programmeThe appliance must be in programmeselection mode.1. To enter the setting mode, press andhold the programme button until theindicator starts to flash.• The end indicator indicates thecurrent setting: End indicator on =Acoustic signal on.2. Press the programme button to changethe setting.• End indicator off = Acoustic signaloff.3. Press the on/off button confirm thesetting.Before first use1. Fill the rinse aid dispenser.2. Open the water tap.3. Start a program to remove anyprocessing residuals that can still beinside the appliance. Do not usedetergent and do not load the baskets.ENGLISH 9 |
Related manuals for IKEA LAGAN
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine