                            | |
Daily useWarning! Refer to Safetychapters.Ignition of the burnerAlways ignite the burner beforeyou place the pots or pans.To ignite the burner:1. Push the control knob and turn itanticlockwise to the maximum positionmarked with .2. Once lit keep the control knob pushedfor about 5 sec. As a result,thermocouple heats up, and the safetydevice switches off. If you do not pushthe knob, the gas supply is interrupted.3. When you light the flame, you canadjust it.If the burner does not ignite,after a few attempts, check if thecrown and its cap are in correctpositions.123451 Burner cap2 Burner crown3 Injector4 Thermocouple5 Ignition candleWarning! Do not keep thecontrol knob pressed for morethan 15 seconds. If the burnerdoes not light after 15 seconds,release the control knob, turn itinto the off position, and wait forat least 1 minute before trying tolight the burner again.If there is no spark when thecontrol knob is pushed then theremay be a fault with the powersupply. Refer to thetroubleshooting section.Warning! Be careful when youuse open fire in the kitchenenvironment. The manufacturerdeclines any responsibility incase of misusing the flame.If the burner accidentally goesout, turn the control knob to theoff position and wait for at least1 minute before trying to light itagain.When you switch on the mainsafter installation or a power cut,the spark generator activatesautomatically.The hob is supplied with theprogressive valves. They makethe flame regulation moreprecise.Turning the burner offTo put the flame out, turn the relevantcontrol knob to the symbol .ENGLISH 10 |
Related manuals for IKEA MATMASSIG
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine