Heat setting Automatic switch off after- 6 hours- 5 hours4 hoursHeat setting Automatic switch off after- 1.5 hoursIf cookware that is not suitable is used,lights up in the display and after 2minutes the indicator for the cooking zoneswitches itself off.Helpful hints and tipsCookware is suitable for inductioncooking zones if marked by the manu-facturer.When a cooking zone is switched on, itmay hum briefly. This is a characteristicof all ceramic glass cooking zones and doesnot impair either the function or the life ofthe appliance.Cookware sizesInduction cooking zones adapt automatical-ly to the size of the bottom of the cookware.But, it must have a minimum diameter de-pending on the size of the cooking zone.Cooking zone Minimum diameterof cookware base[mm]Right rear cookingzone145Cooking zone Minimum diameterof cookware base[mm]Right front cookingzone125Left rear cookingzone145Left front cookingzone180Energy saving• If possible, always place lids on the pans.• Place cookware on the cooking zone be-fore you switch it on.• The bottom of the cookware should be asthick and flat as possible.Care and cleaningWarning! Switch the appliance off andlet it cool down before you clean it.Warning! For safety reasons, do notclean the appliance with steamblasters or high-pressure cleaners.Warning! Sharp objects and abrasivecleaning agents will damage theappliance. Clean the appliance andremove the residues with water andwashing up liquid after each use. Removealso the remnants of the cleaning agents!Scratches or dark stains on the glassceramic that cannot be removed donot affect the functioning of the appliance.ENGLISH 9