IKEA UNDVIKA Manual
                                                                            |
6Getting StartedOpen lid (9 & 19) and insert 3xAAA/HR03 NiMH batteries in both parent unit andbaby unit with correct polarity.Connect wall adapter dc plug into baby unit connector (2)How to useA, Baby Unit1. Switch the power on by turning the On/Off switch (1) from 0 to 1. When thepower is on, the Battery indicator (4) lights up green. If the indicator startsblinking red, the unit needs to be charged.2. You can adjust the sensitivity of the microphone from 1 to 3 using theMicrophone sensitivity control (1). The microphone is most sensitive to soundwhen it is set to 3, and least sensitive when it is set to 1. If there is a lot ofbackground noise, it’s a good idea to lower the microphone sensitivity. If thesurroundings are quiet, the microphone sensitivity can be set higher.3. You can search for the parent unit by pressing search button (3). Pressing thebutton will make the parent unit emit a notification sound for 20 seconds.Long press on the talk back button on the parent unit will turn the notificationsound off.4. The Range/Transmitting indicator (5) lights up green when it picks up sound.Solid green when parent unit is within range. Flashing red when parent unit isout of range.5. Place the baby unit near your child, with the microphone facing the child. Makesure the unit is close enough to pick up sounds from your child, but not soclose that your child can reach it. 0.9 meter (3 ft) is a good distance.B, Parent UnitNOTE! Make sure the parent unit is at least a couple of meters away from thebaby unit before you switch it on. If the units are too close to each other, feedbackbetween the units can create a loud screeching noise.1. Switch the power on by turning the On/Off switch (10) from 0 to 1. When the |
Related manuals for IKEA 404.803.47
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine