Clock functionsClock functions tableClock function ApplicationTIME OF DAY To set, change or check the time of day.DURATION To set how long the appliance operates.END To set when the appliance deactivates.TIME DELAY To combine DURATION and END function.MINUTE MIND-ERTo set countdown time. This function has no effect on the op-eration of the appliance.Setting and changing the timeYou must set the time before you operatethe oven.Only the top oven works withoutthe set time.The flashes when you connect theappliance to the electrical supply, whenthere was a power cut or when the timer isnot set.Press the or to set the correct time.After approximately five seconds, theflashing stops and the display shows thetime of day you set.To change the time of day press againand again until starts to flash.Setting the DURATION1. Set an oven function and temperature.2. Press again and again until startsto flash.3. Press or to set the DURATIONtime.The display shows .4. When the time ends, flashes and anacoustic signal sounds. The appliancedeactivates automatically.5. Press any button to stop the acousticsignal.6. Turn the knob for the oven functions andthe knob for the temperature to the offposition.DURATION works only for themain oven.Setting the END1. Set an oven function and temperature.2. Press again and again until startsto flash.3. Press or to set the time.The display shows .4. When the time ends, flashes and anacoustic signal sounds. The appliancedeactivates automatically.5. Press any button to stop the signal.6. Turn the knob for the oven functions andthe knob for the temperature to the offposition.The function works only for themain oven.ENGLISH 13