©Copyright Lotronic 2018 Lotronic SA – Av. Z. Gramme 9 – B – 1480 SAINTESLLEEDD PPAARRTTYY LLIIGGHHTT((JJDDLL003322LLEEDD // JJDDLL003344LLEEDD))INSTRUCTIONSENGLISHCAUTIONPlease read this manual before use.For indoor use onlyPlease keep this unit out of reach of little children or pets.Disconnect this product from power immediately in case of malfunction.Do not resume use until it’s repaired.Please unplug the power cord if you want to stop use of this unit for long time.Instructions of Use1. Carefully put this product onto a clean, flat, and solid surface, such as a table top orConnect the individual spots’ plug-in connections with the corresponding sockets on thecontrol unit cabinet-top, and connect to power.2. Set the ON/OFF switch to ON position. You can now select the “SPEED” or “MUSIC”functions using the two adjustable controls on the front of the control module.3. To activate device’s chasing function, turn the “MUSIC” control to the left (selecting thefirst possible setting). You can now use the “SPEED” control to adjust the flashing speed.4. The “Sound response” function is activated using the left control. The light spots nowreacts both to light sequence and sounds. You can adjust the microphone’s sensitivity.Select the desired flashing speed using the “SPEED” control and adjust the integratedmicrophone’s sensitivity level using the “MUSIC” control. The light spots will now flashaccording to the intensity of the sound near the unit.5. To change colour effect, please pull out all the plugs in the row jacks and detach thecombination tube for a new combination.6. Please use a damp, soft cloth for cleaning.SpecificationsOperating voltage:-Power adapter input: 220-240Vac 50/60Hz-Power adapter output: 14 Vdc 300mAConsumption: 3.6WLight bulbs: 47 LEDs per module (red, yellow, orange, green or blue)Electric products must not be put into household waste. Please bring them to a recyclingcentre. Ask your local authorities or your dealer about the way to proceed.