Ibiza LAS200B-MULTI User Manual

DMX512This laser light is controlled by the standard DMX. Please connectcontrolling panel with the lighting as followingBefore using the DMX512 controller, you should set the channeladdress. It can be set 001~511 address, every binary address switchhas a digital no, please refer to:No. Digital No. No. Digital No.1st 1 6th 322nd 2 7th 643rd 4 8th 1284th 8 9th 2565th 16 10th Function switchDMX Control Parameter ChartChannel Function Value Description0～69 Close, laser OFF70～139 Sound active mode140～209 AUTO modeCH1 Mode210～255 DMX mode0～84 clock direction running85～169 Counter clock direction running170～251 Both sides to rotationCH2Runningdirection252～255 Stop rotation0～20 No twinkle21～240 From slow to fast, 6 grade speedCH3 Twinklespeed241～255 Twinkle by soundCH4 Runningspeed 0～255 0 is slow,255 is speedy, has 200grade speedCH5 Colorselection No special effectMaintenance☆ Please clean the lens regularly. Do not do it using the wet cloth orother chemical. the clean times is depend on the using frequencyand surrounding condition; it is recommended that should becleaned every 20 days;☆ Please clean the lighting surface and engine outlet regularly.☆ Be sure that there is no flammable or explosive subject nearby.The least distance is 0.5 meters. at the same time, keep morethan 15cm between the wall and laser lighting;Warning Power off before installation or maintenance; The danger class of this laser lighting is CLASS 3 B. it’sdangerous for observing laser. The safe minimum distance is13cm,the safe maximum time is 10 seconds; Keep at least 0.5 meters distance between the lighting andflammable material;Technical parameters1. Laser diode: DPSS blue450nm2. Power supply: AC220V—240V, 50/60Hz3. Laser power: Blue 200mW4. Motor: N1.8 high precision step motor5. Control mode: sound control/auto/DMX6. Dimensions: 272 x 100 x 135mm7. Net weight: 2.3KG8. Gross weight: 2.6KGDANGERLASER RADIATION AVOID EXPOSURETO BEAM CLASS 3B LASER PRODUCT