Ibiza LBM-20 Instruction Manual

© Copyright LOTRONIC 2014 LMB20 Page 3INSTALLATIONOrientationThis fixture may be mounted in flat position, provided there is adequate room for ventilationIt is important never to obstruct the fan or vents pathway.When selecting installation location, take into consideration routine maintenance.Safety cables must always be used.Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes orrestricted ventilation.If the external flexible cable or cord of this device is damaged, it shall be exclusively replaced by the manufacturer orhis service agent or a similar qualified person in order to avoid a hazard.Make sure the installation position is stable before you place the device. We will not take any responsibility fordamages caused by a badly installed unit.Power Supply ConnectionThe exclusive plug should be used between the connection of unit and power. Please ensure that the rated voltageand frequency are accordance with the power supply. The required input voltage and frequency are: 220-240Vac –50-60HzNote: the ground wire (yellow/green double-color wire) must be safely connected; the electrical installation must bein accordance with the related standardsOPERATION- Switch the device on in using the power switch located on the rear panel of the bubble machine.- You will notice that internal bubble drum and fan are activated. Bubbles are now produced.- Use wireless remote control to activate the production of bubbleCleaning and Using Frequency of ProductPlease make sure that the device is power off before dismantling or maintaining, it’s very important to keep the unitclean. Frequent cleaning will prolong the life time. It’s not allowed to use alcohol or chemical solvent.When the device doesn’t work, please check if the fuse is burnt out or not. If it is, the same fuse should be replaced,find out the faulty and restart the light. But please note the repair must be handled by professional.TECHNICAL SPECIFICATIONSVoltage: ........................................................................................................ 220-240Vac∼ 50-60HzPower ......................................................................................................................................300WWarming up time ....................................................................................................................... 7mnSpray distance ............................................................................................................................ 9mCoverage .............................................................................................................................. 100m2Fog liquid bottle capacity .......................................................................................................... 2.5LDimensions: ..................................................................................................... 500 x 480 x 410mmN.W .......................................................................................................................................... 10kgElectric products must not be put into household waste. Please bring them to a recycling centre.Ask your local authorities or your dealer about the way to proceed.