Icom IC-7100 Service Manual

Also see for IC-7100: Finger touch operation Specification Basic Manual Advanced instructions Instruction manual

Contents

Icom IC-7100 Service Manual Manual pdf 26 page image

4-5ADJUSTMENT ITEM TRANSCEIVER'S CONDITION OPERATION ADJUSTPOINT VALUEPREPARATION – • Connect the AG and millivoltmeter to[MIC], and then set it as;Frequency : 1.5 kHzLevel : 30 mVrms• Connect a power meter to [ANT1].– Push [NB].[HF/50/70M BAND]TX TOTAL GAINADJUSTMENTPush [MENU] to enter the Transmit adjustment menu.1 • Display: "Total Gain HF" – – Push [SET].(Automatically startsto transmit.)2 • Display: "Total Gain HF2" [MAIN DIAL] 50 WPush [SET]*.3 • Display: "Total Gain HF1" – Push [SET].(Automatically starts totransmit.A beep sounds, andthen another beepssound 3 sec. later.*)4 • Display: "Total Gain HF3" Push [SET].(Automatically starts totransmit.A beep sounds, andthen another beepssound 3 sec. later)5 • Display: "Total Gain 50M"• Transmit continues[MAIN DIAL] 50 WPush [SET].6 • Display: "Total Gain 70M"• Transmit continues25 WPush [SET]*.TX POWER & POWERMETER SETTING1 • Display: "POWER HF" • Push [SET]. (Automatically starts totransmit.)– –2 • Display: "POWER HF Min"• Transmit continues– [MAIN DIAL] 2 WPush [SET].3 • Display: "POWER HF 10%"• Transmit continues10 WPush [SET].4 • Display: "POWER HF Tuner"• Transmit continues10 WPush [SET].5 • Display: "POWER HF 50%"• Transmit continues50 WPush [SET].6 • Display: "POWER HF 100%"• Transmit continues105 WPush [SET]*.4-5 TRANSMIT ADJUSTMENTS (HF/50 MHz/70 MHz BANDS)SETReterns to the adjustment screen.Stores the value and move to the next item.Starts the transmit adjustment.1) Set or modify the adjustment value as specifi ed by rotating [MAIN DIAL].2) Push [SET] to store the value.*; Stop transmitting.