Icom IC-7610 Reference Manual
Also see for IC-7610: Basic ManualReference guideAdvanced manualService manual
             | |
3D General descriptionYou can get I/Q signals from the [USB 2] port on the IC-7610 by connecting the IC-7610 and a PC, with a USBcable. You can receive I/Q signals and control the IC-7610, through the USB cable.Requirement:• IC-7610 firmware must be version 1.20 or later.• Windows 7 /8.1/10 PC (32 bit or 64 bit)• USB 3.0 or higher• USB I/Q driver (USB I/Q Package for HDSDR)You can download it from the Icom web site. (The software is commonly used with HDSDR*.)*An SDR receive software (freeware). You can download it from: http://www.hdsdr.de/I/Q signal specifications:Sampling frequency Bitdepth Signal Bandwidth Band (Main/Sub)1.92 MHz 16-bit 1.66 MHz Main or Sub(Selectable)■ GeneralI/Q SIGNAL(Ver.1.20 or later)IC-7610[USB 2] portPC[USB] port(USB 3.0)Windows 10 (32/64-bit)Windows 8.1 (32/64-bit)Windows 7 (32/64-bit)Driver• I/Q data• Control commandUSB 3.0 cable |
Related manuals for Icom IC-7610
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine