Icom IC-A14 Instruction Manual

Also see for IC-A14: Price list Information Service manual Service manual Instruction manual

Icom IC-A14 Instruction Manual Manual pdf 23 page image

185SCAN OPERATION■ Scan typesThe IC-A14 has 3 scan types to suit your needs. IC-A14Shas 2 scan types.■ COM band scanq Push [CLR] to select the frequency mode.w Push [SQLY]/[SQLZ] to set the squelch level to the pointwhere noise just disappears.For the IC-A14e Push [FUNC], then push [SCAN](2) to start the scan.• When a signal is received, the scan pauses until the signal dis-appears.• To change the scanning direction, push [Y]/[Z].For the IC-A14Se Hold down [Y]/[Z] for 1 second to start the scan.• When a signal is received, the scan pauses until the signal dis-appears.• To change the scanning direction, push [Y]/[Z].r To stop the scan, push [CLR].WEATHER CHANNEL SCANRepeatedly scans all “TAG” weather channels. Weatherchannels are available for the IC-A14 only.COM BAND SCANRepeatedly scansa l l f r e q u e n c i e sover the entireCOM band.108.00MHzScanJump118.00MHz136.975MHzMEMORY SCANRepeatedly scans se-lected memory bank’sall “TAG” memory chan-nels. Used for checkingoften-used channels andbypassing usually busychannels such as control-tower frequencies.non-TAGchannelnon-TAG channelMch 2 Mch 4 Mch 6Mch 7Mch 1Mch 8Mch 10Mch 19Decimal point blinks during ascan.[FUNC][CLR][SCAN](2)[Y][Z]12345678910111213141516171819