Icom IC-A14 Instruction Manual

Also see for IC-A14: Price list Information Service manual Service manual Instruction manual

Icom IC-A14 Instruction Manual Manual pdf 24 page image

■ Weather channel scan(Available with the IC-A14 only)q Push [FUNC], then push [WX](7) to enter the weatherchannel mode.w Set squelch to the point where noise just disappears with[SQLY]/[SQLZ].e Push [FUNC], then push [SCAN] (2) to start the scan.• When a signal is received, the scan pauses until it disappears.• To change the scanning direction, push [Y]/[Z].r To stop the scan, push [CLR].■ Memory scanNOTE: Program 2 or more memory channels with a “TAG”setting to start a memory scan.q Push [MR] to enter the memory mode.• For the IC-A14, select the desired BANK if desired. (p. 12)w Push [SQLY]/[SQLZ] to set the squelch level to the pointwhere noise just disappears.For the IC-A14e Push [FUNC], then push [SCAN] (2) to start the scan.• When a signal is received, the scan pauses until the signal dis-appears.• To change the scanning direction, push [Y]/[Z].For the IC-A14Se Hold down [Y]/[Z] for 1 second to start the scan.• When a signal is received, the scan pauses until the signal dis-appears.• To change the scanning direction, push [Y]/[Z].195 SCAN OPERATIONDecimal point blinks during ascan.[FUNC][SCAN](2)[WX](7)[Y][Z]Decimal point blinks during ascan.[FUNC][MR][SCAN](2)[Y][Z]r To stop the scan, push[CLR].