Icom IC-A220 Instruction Manual

Also see for IC-A220: Service manual Installation guide Instruction manual Installation manual Installation guide

31 PANEL DESCRIPTION3■ Function displayCH09 SAMPLETEST121.525118.00RX DUAL MEMORY RXICSOF DTXAUe tr y eio!2uq!1w!0q ACTIVE FREQUENCY READOUT➥ Displays the active frequency. (p. 5)➥ Displays the menu mode items in the menu mode.(p. 18)w TX INDICATORDisplayed while transmitting. (p. 5)e RX INDICATOR➥ Displayed when receiving a signal on the active fre-quency. (p. 5)➥ Displayed when receiving a signal on the standby fre-quency during Dualwatch operation. (p. 14)➥ Displayed when opening the active frequency’s squelchfunction. (p. 5)r INTERCOM READOUTDisplays “ICS” when the intercom function is in use.(p. 16)t DUALWATCH READOUTDisplays “DUAL” when the Dualwatch function is ON.(p. 14)y MEMORY TYPE READOUT➥ Displays “MEMORY” when the regular memory channelis selected. (p. 8)➥ Displays “GRP01”–“GRP05” when the group memorychannel is selected. (p. 8)The group name is also displayed if the name has beenentered.➥ Displays “HISTORY” when the history memory chan-nel is selected. (p. 12)➥ Displays “WEATHER” when the weather memory chan-nel is selected. (p. 12)**For only U.S.A. version transceivers.➥ Displays “GPS” when the GPS memory channel is se-lected. (p. 13)• A third party GPS receiver is required.u STANDBY FREQUENCY READOUT➥ Displays the standby frequency. (p. 5)➥ Displays the setting values in the menu mode. (p. 18)i CHANNEL NAME READOUTDisplays the channel name in the memory mode. (p. 10)o MEMORY CHANNEL READOUTDisplays the selected memory channel number in thememory mode. (p. 8)!0 SQUELCH MODE READOUTDisplays the squelch mode status. (pp. 6, 20)!1 TEST INDICATORDisplays “ TEST” while the squelch test function is ON.(p. 16)!2 LOCK INDICATOR (p. 15)➥ Displays “OF D” while the dial lock function is in use.➥ Displays “OF P” while the panel lock function is in use.